Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Inspect Valve and Cartridge for Markings

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Now that the valve body is exposed, you can begin the identification process. First, inspect the valve body for any markings. Look for a brand name (e.g., MOEN, DELTA, KOHLER, PRICE PFISTER) or a logo cast directly into the brass body. Also, look for any series of numbers or letters, which could be a part number or model number. Next, examine the cartridge—the part the handle connected to. The cartridge's shape, color, and size are key identifiers. Some cartridges have part numbers stamped on them. Pay close attention to how the cartridge is held in place. Is it a U-shaped clip, a threaded bonnet nut, or screws? This mounting method is a major clue to the brand and model.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Inspect Valve and Cartridge for Markings

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Now that the valve body is exposed, you can begin the identification process. First, inspect the valve body for any markings. Look for a brand name (e.g., MOEN, DELTA, KOHLER, PRICE PFISTER) or a logo cast directly into the brass body. Also, look for any series of numbers or letters, which could be a part number or model number. Next, examine the cartridge—the part the handle connected to. The cartridge's shape, color, and size are key identifiers. Some cartridges have part numbers stamped on them. Pay close attention to how the cartridge is held in place. Is it a U-shaped clip, a threaded bonnet nut, or screws? This mounting method is a major clue to the brand and model.

Videos for this step

Prepare and Inspect New CartridgeDiagnose Leak and Identify BrandFinal Comparison and Confirmation

Tools and Materials

← Project

How to Identify Your Shower Valve for Replacement Parts

Step 4 of 6·10 min left

Shut Off Water Supply and Prepare Work Area
5 mins1 itemsBeginner
Remove the Shower Handle
5 mins2 itemsIntermediate
Remove the Escutcheon Plate
5 mins1 itemsIntermediate
4
Inspect Valve and Cartridge for Markings
5 mins3 itemsIntermediate
5
Take Detailed Photographs and Measurements
5 mins2 itemsBeginner
6
Match the Valve at a Supply Store or Online
3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.