Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Clean Valve Body and Install New Cartridge

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Once the old cartridge is out, inspect the inside of the brass valve body. Use a rag and a small brush (an old toothbrush works well) to clean out any mineral deposits, debris, or pieces of old rubber seals. The inside surface must be clean and smooth for the new cartridge to seal properly. Take your new cartridge and apply a thin layer of the included plumber's grease (silicone grease) to all the rubber O-rings. This lubricates them and helps ensure a watertight seal. Align the new cartridge with the 'H/C' marking facing up, just as the old one was oriented. Push the new cartridge firmly and evenly into the valve body until it is fully seated. It should slide in until its flange is flush with the front of the valve body.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Clean Valve Body and Install New Cartridge

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Once the old cartridge is out, inspect the inside of the brass valve body. Use a rag and a small brush (an old toothbrush works well) to clean out any mineral deposits, debris, or pieces of old rubber seals. The inside surface must be clean and smooth for the new cartridge to seal properly. Take your new cartridge and apply a thin layer of the included plumber's grease (silicone grease) to all the rubber O-rings. This lubricates them and helps ensure a watertight seal. Align the new cartridge with the 'H/C' marking facing up, just as the old one was oriented. Push the new cartridge firmly and evenly into the valve body until it is fully seated. It should slide in until its flange is flush with the front of the valve body.

Videos for this step

Clean and Flush Valve BodyPrep and Install the New CartridgeInstall New Cartridge

Tools and Materials

← Project

How to Fix a Shower Faucet Leaking from Behind the Handle

Step 5 of 7·35 min left

Shut Off the Water Supply
10 minsIntermediate
Remove the Faucet Handle
10 mins1 itemsIntermediate
Remove the Escutcheon Plate and Sleeve
10 mins2 itemsIntermediate
Remove the Old Cartridge
25 mins4 items
5
Clean Valve Body and Install New Cartridge
15 mins4 itemsAdvanced
6
Reassemble the Faucet
15 mins5 itemsIntermediate
7
Turn On Water and Test for Leaks
5 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.