Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Reassemble the Faucet Internals

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Begin reassembling the faucet in the reverse order of disassembly. First, drop the stainless steel ball back into the faucet body. Make sure the small slot on the side of the ball aligns perfectly with the pin inside the faucet body. Next, place the new plastic cam and packing (from the kit) over the ball. The small lug on the cam should fit into the notch on the side of the faucet body. Now, screw the dome-shaped cap back on by hand until it is snug. Use the channel-lock pliers (with protected jaws) to give it a final quarter-turn to tighten it securely. Do not over-tighten.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Reassemble the Faucet Internals

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Begin reassembling the faucet in the reverse order of disassembly. First, drop the stainless steel ball back into the faucet body. Make sure the small slot on the side of the ball aligns perfectly with the pin inside the faucet body. Next, place the new plastic cam and packing (from the kit) over the ball. The small lug on the cam should fit into the notch on the side of the faucet body. Now, screw the dome-shaped cap back on by hand until it is snug. Use the channel-lock pliers (with protected jaws) to give it a final quarter-turn to tighten it securely. Do not over-tighten.

Videos for this step

Reassemble the FaucetReassemble FaucetInstall New Rod Assembly and Reassemble Faucet

Tools and Materials

← Project

How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)

Step 5 of 6·25 min left

Shut Off Water Supply and Prepare Work Area
10 mins1 itemsBeginner
Remove the Faucet Handle
10 mins3 itemsIntermediate
Remove the Cap and Ball Assembly
15 mins3 itemsAdvanced
Replace Valve Seats and Springs
20 mins2 itemsAdvanced
5
Reassemble the Faucet Internals
15 mins4 itemsIntermediate
6
Reattach Handle and Test for Leaks
10 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.