Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Turn Water On and Test for Leaks

The final step is to test your work. Go back to the shut-off valve and open it slowly and completely. Return to the outdoor faucet and inspect the packing nut area closely for any signs of water drips or seepage. Turn the faucet on and let water flow, then turn it off again. Check for leaks in both the on and off positions. If a small drip appears from the packing nut, use your wrench to give it one last, very slight (1/8 turn) tightening. If the leak is gone and the handle operates smoothly, the repair is complete.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Turn Water On and Test for Leaks

The final step is to test your work. Go back to the shut-off valve and open it slowly and completely. Return to the outdoor faucet and inspect the packing nut area closely for any signs of water drips or seepage. Turn the faucet on and let water flow, then turn it off again. Check for leaks in both the on and off positions. If a small drip appears from the packing nut, use your wrench to give it one last, very slight (1/8 turn) tightening. If the leak is gone and the handle operates smoothly, the repair is complete.

Videos for this step

Turn Water On and TestTest the RepairReassemble and Verify

Tools and Materials

← Project

How to Fix a Leaky Outdoor Faucet Packing Nut

Step 6 of 6·5 min left

Turn Off Water Supply
5 minsBeginner
Tighten the Packing Nut
5 mins2 itemsBeginner
Disassemble the Faucet Handle and Nut
10 mins2 itemsIntermediate
Remove Old Packing and Install New
10 mins5 itemsIntermediate
Reassemble the Faucet
5 mins3 itemsBeginner
6
Turn Water On and Test for Leaks
5 mins1 itemsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.