Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Disassemble and Clean the P-Trap

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

If plunging fails, the clog is likely in the P-trap. With your bucket positioned underneath, use a pair of channel-lock pliers to loosen the two large slip nuts holding the curved P-trap in place. You may be able to loosen them by hand. Once loose, unscrew them the rest of the way and gently pull the trap downwards. Be ready for water and sludge to spill into the bucket. Take the P-trap to another sink or outside, empty its contents, and use a bottle brush or a bent wire coat hanger to scrub out all the grease and debris. Rinse it thoroughly, then reinstall it, making sure any washers are properly seated. Hand-tighten the nuts first, then give them a final quarter-turn with the pliers.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Disassemble and Clean the P-Trap

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

If plunging fails, the clog is likely in the P-trap. With your bucket positioned underneath, use a pair of channel-lock pliers to loosen the two large slip nuts holding the curved P-trap in place. You may be able to loosen them by hand. Once loose, unscrew them the rest of the way and gently pull the trap downwards. Be ready for water and sludge to spill into the bucket. Take the P-trap to another sink or outside, empty its contents, and use a bottle brush or a bent wire coat hanger to scrub out all the grease and debris. Rinse it thoroughly, then reinstall it, making sure any washers are properly seated. Hand-tighten the nuts first, then give them a final quarter-turn with the pliers.

Videos for this step

Disconnect P-TrapClean the P-TrapPreparation and Old P-Trap Removal

Tools and Materials

← Project

How to Clear a Grease-Clogged Kitchen Drain

Step 5 of 7·1.1 hr left

Prepare the Work Area
5 mins3 itemsBeginner
Attempt Boiling Water Flush
15 mins4 itemsBeginner
Apply Baking Soda and Vinegar Solution
30 mins7 itemsBeginner
Plunge the Drain
10 mins4 itemsIntermediate
5
Disassemble and Clean the P-Trap
30 mins4 itemsAdvanced
6
Snake the Drain Line
25 mins5 itemsAdvanced
7
Reassemble and Test for Leaks
10 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.