Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Repeat and Finalize Adjustment

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Repeat the process of adjusting and testing. Continue making small, quarter-turn adjustments to the screw (counter-clockwise to lower, clockwise to raise) and then re-testing the pressure by running a faucet and reading the gauge. Continue this iterative process until the gauge consistently reads within the desired range of 50-60 PSI.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Repeat and Finalize Adjustment

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Repeat the process of adjusting and testing. Continue making small, quarter-turn adjustments to the screw (counter-clockwise to lower, clockwise to raise) and then re-testing the pressure by running a faucet and reading the gauge. Continue this iterative process until the gauge consistently reads within the desired range of 50-60 PSI.

Videos for this step

Verify Final PressureRe-Test and FinalizeAdjust the Pressure Screw

Tools and Materials

← Project

How to Adjust a Water Pressure Reducing Valve (PRV)

Step 5 of 6·15 min left

Establish Baseline Pressure Reading
5 mins2 itemsBeginner
Loosen the Locknut
5 mins2 itemsIntermediate
Make Initial Adjustment
5 mins2 itemsIntermediate
Test New Pressure Setting
10 mins1 itemsBeginner
5
Repeat and Finalize Adjustment
10 mins3 itemsIntermediate
6
Tighten the Locknut
5 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.