Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Manually Clear Blockages

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Use an Allen wrench (usually included with the disposal or readily available at hardware stores) to manually rotate the motor shaft. Insert the wrench into the hex-shaped hole at the bottom and rotate back and forth to dislodge debris.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Manually Clear Blockages

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Use an Allen wrench (usually included with the disposal or readily available at hardware stores) to manually rotate the motor shaft. Insert the wrench into the hex-shaped hole at the bottom and rotate back and forth to dislodge debris.

Videos for this step

Manually Spin the DisposalManually Free the JamManually Turn Disposal Blades

Tools and Materials

← Project

Garbage Disposal Repair: Troubleshooting a Non-Responsive Unit

Step 3 of 4·7 min left

Safely Disconnect Power
2 minsBeginner
Attempt a Reset
1 minBeginner
3
Manually Clear Blockages
5 mins1 itemsIntermediate
4
Test and Verify Operation
2 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.