Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Test and Finalize the Installation

Turn the water supply back on slowly and carefully check for leaks around all connections. Restore power to the disposal. Run cold water and thoroughly test the disposal's operation. Listen for any unusual sounds or vibrations.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Test and Finalize the Installation

Turn the water supply back on slowly and carefully check for leaks around all connections. Restore power to the disposal. Run cold water and thoroughly test the disposal's operation. Listen for any unusual sounds or vibrations.

Videos for this step

Test InstallationRestore Water and Check for LeaksCheck for Leaks

← Project

Garbage Disposal Installation & Replacement: A Complete DIY Guide

Step 4 of 4·15 min left

Disconnect the Old Garbage Disposal
30 mins3 itemsAdvanced
Install the Mounting Assembly
15 mins2 itemsIntermediate
Connect and Secure the New Garbage Disposal
30 mins2 itemsAdvanced
4
Test and Finalize the Installation
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.