Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Test, Adjust, and Check for Leaks

Turn the water supply back on slowly and check for leaks around all connections. Flush the toilet several times to ensure proper filling and flushing. Adjust the fill valve as needed to achieve the correct water level.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Test, Adjust, and Check for Leaks

Turn the water supply back on slowly and check for leaks around all connections. Flush the toilet several times to ensure proper filling and flushing. Adjust the fill valve as needed to achieve the correct water level.

Videos for this step

Turn On Water Supply and AdjustAdjust and TestTest for Leaks

← Project

Fix Toilet Flush & Refill: Valve & Flapper Guide

Step 5 of 5·10 min left

Shut Off Water Supply & Empty Tank
5 mins1 itemsBeginner
Remove the Old Fill Valve
10 mins1 itemsIntermediate
Install the New Fill Valve
15 minsIntermediate
Replace the Flapper
5 mins1 itemsBeginner
5
Test, Adjust, and Check for Leaks
10 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.