Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Test and Adjust the New Fill Valve

Turn the water supply back on slowly. Check for any leaks around the fill valve and supply line connections. Adjust the fill valve height as needed to achieve the correct water level in the tank (usually about ½ inch below the overflow tube).

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Test and Adjust the New Fill Valve

Turn the water supply back on slowly. Check for any leaks around the fill valve and supply line connections. Adjust the fill valve height as needed to achieve the correct water level in the tank (usually about ½ inch below the overflow tube).

Videos for this step

Turn On Water and Adjust LevelTest and AdjustAdjust Tank Water Level

← Project

Fix Leaky Toilets: A Step-by-Step Guide to Replacing Your Fill Valve

Step 5 of 6·15 min left

Prepare for Toilet Fill Valve Replacement
5 minsBeginner
Disconnect the Water Supply Line
5 mins1 itemsBeginner
Remove the Old Fill Valve
10 mins1 itemsIntermediate
Install the New Toilet Fill Valve
10 mins2 itemsIntermediate
5
Test and Adjust the New Fill Valve
10 minsBeginner
6
Final Check and Verification
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.