Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Replace O-rings and Washers

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Inspect the O-rings and washers. These are often the cause of leaks in compression faucets. Replace any that are worn, cracked, or damaged. Apply a small amount of plumber's grease to the new O-rings before installing them to ensure a watertight seal.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Replace O-rings and Washers

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Inspect the O-rings and washers. These are often the cause of leaks in compression faucets. Replace any that are worn, cracked, or damaged. Apply a small amount of plumber's grease to the new O-rings before installing them to ensure a watertight seal.

Videos for this step

Inspect WashersRebuild Faucet StemInspect Parts for Wear

Tools and Materials

← Project

Fix a Leaky Faucet: Troubleshooting Faulty Water Intake

Step 3 of 5·40 min left

Turn Off the Water Supply
5 mins1 itemsBeginner
Disassemble the Faucet
20 mins2 itemsAdvanced
3
Replace O-rings and Washers
15 mins3 itemsIntermediate
4
Reassemble the Faucet
20 mins2 itemsAdvanced
5
Test for Leaks
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.