Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Reconnect the Water Supply Lines

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

If the supply lines are in good condition, clean the threads on the faucet tailpieces and supply lines using a wire brush. Apply plumber's Teflon tape to the threads of the faucet tailpieces. Reconnect the supply lines, tightening them securely with the adjustable wrench. Slowly turn the water supply back on and carefully check for any leaks.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Reconnect the Water Supply Lines

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

If the supply lines are in good condition, clean the threads on the faucet tailpieces and supply lines using a wire brush. Apply plumber's Teflon tape to the threads of the faucet tailpieces. Reconnect the supply lines, tightening them securely with the adjustable wrench. Slowly turn the water supply back on and carefully check for any leaks.

Videos for this step

Test for leaks.Connect water supply linesFinal Connections

Tools and Materials

← Project

Fix a Leaky Faucet: Repairing Water Intake Leaks

Step 5 of 5·15 min left

Turn Off the Water Supply
5 minsBeginner
Prepare Your Work Area
2 mins1 itemsBeginner
Disconnect the Water Supply Lines
15 mins1 itemsIntermediate
Inspect Supply Lines for Damage
5 mins1 itemsIntermediate
5
Reconnect the Water Supply Lines
15 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.