Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Shut Off the Water Supply

Before you begin, turn off the hot and cold water supply valves located under the sink. These are usually angle stops. Fully open the faucet to release any remaining water pressure in the lines. This prevents a messy surprise later!

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Shut Off the Water Supply

Before you begin, turn off the hot and cold water supply valves located under the sink. These are usually angle stops. Fully open the faucet to release any remaining water pressure in the lines. This prevents a messy surprise later!

Videos for this step

Prepare PlumbingPreparation and SafetyShut Off Water Supply

← Project

Faucet Replacement: A Step-by-Step DIY Guide

Step 1 of 3·55 min left

1
Shut Off the Water Supply
5 minsBeginner
2
Disconnect the Old Faucet
20 mins2 itemsAdvanced
3
Install the New Faucet
30 mins1 itemsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.