Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Test the Drain

Turn on the hot water tap and let it run into the drain for at least 5-10 minutes. Observe the drainage speed. If the water flows freely without backing up, the clog has likely been cleared. If it still drains slowly, you may need to repeat the snaking process or try a different method.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Test the Drain

Turn on the hot water tap and let it run into the drain for at least 5-10 minutes. Observe the drainage speed. If the water flows freely without backing up, the clog has likely been cleared. If it still drains slowly, you may need to repeat the snaking process or try a different method.

Videos for this step

Test Drain FlowTest drain flowTest drain flow

Tools and Materials

← Project

Drain Snaking

Step 6 of 7·20 min left

Protect the Work Area
5 minutes2 items
Remove the Drain Stopper/Cover
5 minutes2 items
Insert the Drain Snake
10 minutes1 items
Engage the Clog
15 minutes1 items
Retract the Drain Snake
10 minutes2 items
6
Test the Drain
10 minutes1 items
7
Clean Up
10 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.