Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Apply Finish

Once the glue has fully dried, apply your chosen finish. This could be stain, paint, or a clear sealant. Apply thin, even coats according to the product manufacturer's instructions, allowing adequate drying time between coats. Lightly sand with fine-grit sandpaper (220-grit or higher) between coats for a smoother finish, if desired.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Apply Finish

Once the glue has fully dried, apply your chosen finish. This could be stain, paint, or a clear sealant. Apply thin, even coats according to the product manufacturer's instructions, allowing adequate drying time between coats. Lightly sand with fine-grit sandpaper (220-grit or higher) between coats for a smoother finish, if desired.

Videos for this step

Apply Desired FinishApply Protective FinishApply Protective Finish

Tools and Materials

← Project

DIY Luggage Rack

Step 5 of 5·2 hr left

Cut Wood Components
30 minutes5 items
Sand Wood Components
45 minutes3 items
Assemble Leg Frames
40 minutes5 items
Attach Support Slats
60 minutes6 items
5
Apply Finish
120 minutes6 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.