Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Test for Leaks and Final Touches

Turn the water supply back on slowly. Carefully check all connections, the handle, escutcheon plate, and showerhead for any leaks. If leaks occur, tighten connections or reinstall components as needed. Run the shower for several minutes to thoroughly test the water pressure and temperature.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Test for Leaks and Final Touches

Turn the water supply back on slowly. Carefully check all connections, the handle, escutcheon plate, and showerhead for any leaks. If leaks occur, tighten connections or reinstall components as needed. Run the shower for several minutes to thoroughly test the water pressure and temperature.

Videos for this step

Test for LeaksReinstall Cartridge and Test OperationTest for Leaks

← Project

Delta Shower Trim Kit Installation: A Step-by-Step DIY Guide

Step 4 of 4·10 min left

Shut Off the Shower's Water Supply
5 minsBeginner
Carefully Remove the Old Shower Trim
15 mins1 itemsIntermediate
Install the New Delta Shower Trim Kit
30 mins1 itemsIntermediate
4
Test for Leaks and Final Touches
10 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.