Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Remove the Old Shower Head

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully unscrew the old shower head by turning it counterclockwise. Use an adjustable wrench or pliers wrapped in a cloth to protect the finish if necessary. Clean the shower arm threads thoroughly with a cloth to remove any debris or old Teflon tape.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Remove the Old Shower Head

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully unscrew the old shower head by turning it counterclockwise. Use an adjustable wrench or pliers wrapped in a cloth to protect the finish if necessary. Clean the shower arm threads thoroughly with a cloth to remove any debris or old Teflon tape.

Videos for this step

Remove Old Showerhead and Clean ThreadsInstall New Shower Arm and HeadRemove Existing Shower Head

Tools and Materials

← Project

Delta Shower Head Installation: A Step-by-Step Guide

Step 2 of 5·17 min left

Turn Off the Water Supply
5 minsBeginner
2
Remove the Old Shower Head
5 mins2 itemsIntermediate
3
Apply Teflon Tape for a Watertight Seal
2 mins1 itemsBeginner
4
Install the New Delta Shower Head
5 mins2 itemsBeginner
5
Test for Leaks and Final Checks
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.