Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Remove the Old Delta Shower Handle

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully remove the handle screw cover (often a small cap or button). Use a small flathead screwdriver or Allen wrench to gently pry it off without damaging the finish. Then, remove the screw securing the handle, using the appropriate screwdriver (often a small Phillips or flathead).

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Remove the Old Delta Shower Handle

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully remove the handle screw cover (often a small cap or button). Use a small flathead screwdriver or Allen wrench to gently pry it off without damaging the finish. Then, remove the screw securing the handle, using the appropriate screwdriver (often a small Phillips or flathead).

Videos for this step

Remove tap handleRemove handleDisassemble Faucet Handle

Tools and Materials

← Project

Delta Shower Handle Replacement: A Step-by-Step DIY Guide

Step 2 of 4·25 min left

Shut Off the Water Supply
5 minsBeginner
2
Remove the Old Delta Shower Handle
10 mins2 itemsIntermediate
3
Install the New Delta Shower Handle
10 mins1 itemsIntermediate
4
Check for Leaks and Restore Water Flow
5 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.