Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Remove the Old Valve

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the old valve cartridge or valve stems. This usually involves unscrewing them or carefully extracting them with pliers. Inspect the old parts for wear and tear; this might indicate the cause of any prior problems.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Remove the Old Valve

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the old valve cartridge or valve stems. This usually involves unscrewing them or carefully extracting them with pliers. Inspect the old parts for wear and tear; this might indicate the cause of any prior problems.

Videos for this step

Remove The Old CartridgeExtract Old CartridgeRemove Cartridge

Tools and Materials

← Project

Delta Shower Faucet Installation & Upgrade Guide

Step 3 of 5·46 min left

Turn Off the Water Supply
5 minsBeginner
Remove the Old Faucet Trim
15 mins1 itemsIntermediate
3
Remove the Old Valve
30 mins1 itemsAdvanced
4
Install the New Delta Faucet
1 minAdvanced
5
Test for Leaks and Finalize Installation
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.