Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Clean Cabinet Surfaces

Wipe down all surfaces to be painted using a degreaser or a solution of TSP (trisodium phosphate) substitute and water. Pay special attention to areas around the stove and sink, as these tend to accumulate the most grease. Rinse the surfaces thoroughly with clean water to remove any residue from the cleaner. Allow the cabinets to dry completely before proceeding. A clean surface is essential for proper paint adhesion.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Clean Cabinet Surfaces

Wipe down all surfaces to be painted using a degreaser or a solution of TSP (trisodium phosphate) substitute and water. Pay special attention to areas around the stove and sink, as these tend to accumulate the most grease. Rinse the surfaces thoroughly with clean water to remove any residue from the cleaner. Allow the cabinets to dry completely before proceeding. A clean surface is essential for proper paint adhesion.

Videos for this step

Clean and Protect SurfacesClean Cabinet SurfacesClean All Cabinet Surfaces with TSP

Tools and Materials

← Project

Cabinet Painting

Step 2 of 7·16.5 hr left

Remove Cabinet Doors and Hardware
120 minutes3 items
2
Clean Cabinet Surfaces
90 minutes4 items
3
Sand Surfaces for Adhesion
120 minutes3 items
4
Repair Imperfections
60 minutes4 items
5
Prime the Surfaces
180 minutes6 items
6
Paint Cabinet Surfaces
360 minutes6 items
7
Reattach Hardware and Doors
180 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.