Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Test for Leaks and Verify Functionality

Slowly turn the water supply back on and carefully check for leaks around the faucet valves, spout, and drain connections. If you find any leaks, tighten the connections or apply additional Teflon tape as needed. Run both hot and cold water to ensure proper function and that the temperature controls work correctly.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Test for Leaks and Verify Functionality

Slowly turn the water supply back on and carefully check for leaks around the faucet valves, spout, and drain connections. If you find any leaks, tighten the connections or apply additional Teflon tape as needed. Run both hot and cold water to ensure proper function and that the temperature controls work correctly.

Videos for this step

Final ChecksTest faucetTurn on Water and Check for Leaks

← Project

Bathtub Faucet Replacement: A Step-by-Step DIY Guide

Step 4 of 4·15 min left

Turn Off Water Supply and Prepare Work Area
10 minsBeginner
Remove Old Bathtub Faucet and Fixtures
1 min4 itemsAdvanced
Install New Bathtub Faucet and Fixtures
1 min2 itemsAdvanced
4
Test for Leaks and Verify Functionality
15 minsBeginner
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.