Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Disconnect the Old Supply Lines

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully disconnect the supply lines from the old faucet using an adjustable wrench. Place a bucket or towel beneath to catch any remaining water. If the nuts are difficult to loosen, use a penetrating oil like WD-40 and wait for 30 minutes before attempting again. Remember to work slowly and methodically.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Disconnect the Old Supply Lines

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Carefully disconnect the supply lines from the old faucet using an adjustable wrench. Place a bucket or towel beneath to catch any remaining water. If the nuts are difficult to loosen, use a penetrating oil like WD-40 and wait for 30 minutes before attempting again. Remember to work slowly and methodically.

Videos for this step

Disconnect Supply Lines from FaucetRemove the leverDisconnect Spray Hose

Tools and Materials

← Project

Bathroom Fixture Replacement: A Step-by-Step DIY Guide

Step 2 of 3·35 min left

Turn Off the Bathroom Water Supply
5 minsBeginner
2
Disconnect the Old Supply Lines
15 mins2 itemsIntermediate
3
Install the New Bathroom Faucet
20 mins1 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.