Skip to main content

Install Handrail Brackets and Handrail — Attach Handrail Brackets

Beginner8 hours

Part of project

How to Install a Post-Mounted Handrail on Stairs with No Wall · Step 4 of 7

Helpful?

In this video

Before installing the handrail, attach the double-sided, adjustable handrail brackets to the top of each post. These brackets are secured with self-drilling screws into the post. Once all handrail brackets are in place, measure the distance between the center of the end posts, adding about an inch past each bracket for an overhang. Mark and cut the aluminum handrail (Viewrail Bevel Edge Handrail) to the correct length using a miter saw with a metal cutting blade, taping the cut line for a clean cut. Position the handrail onto the brackets, ensuring it's centered, and then secure it using the self-drilling fasteners provided. Install end caps by gently hammering them into place with a rubber mallet, and use corner plates for mitered corners, securing them with screws. Ensure all handrail sections are perfectly level.

91.3K views1.7K
Transcript
Hide

now that we have all of our posts fully fastened down it's now time for our handrail but before we even grab our handrail we need to install the bracket itself for it this is a nice little double-sided bracket system for any type of handrail system whether that be wood or aluminum which view rail can provide either each one of these brackets is just fastened down with two screws on both sides which secures the bracket in place very snugly once all of those brackets are installed and those do install very quickly we proceed to the actual handrail itself i double check and make sure our end posts are perfectly level and as long as they are we can take our measurement i take our measurement and then add about an inch past each bracket then i grab our aluminum handrail and this is actually specifically called out as their beverage handrail that is aluminum with a black powder coat i strike a line tape off where i'm going to be cutting because i want to make sure we have as clean of a cut as possible because people will be dragging their hands across this handrail and cut it to the correct length however we have an opening right here but the system does come with a cap that all we have to do is hammer it snugly in place and we're good to go just try and make sure you're using a rubber melt when hammering aluminum yeah i positioned the bracket post in the dead center of our handrail and once i like the positioning i do clamp it in place prior to fastening the fasteners that come with the kit are self drilling fasteners so we don't have to pre-drill our holes it just takes a little pressure for these screws to penetrate the aluminum the other nice thing about these fasteners is that they do come pre-powder coated so we don't have to worry about trying to paint them ourselves or trying to match our beautiful black handrail the order in which i would suggest installing the handrail is to install the two ends first making sure that those are both perfectly level and then going back to the center post and installing those also making sure that they're perfectly level of course our kit doesn't come with a 24 foot long railing span which is why we have a butt to butt joint at the front of our deck just make sure you're centering each railing to the center of that post then fasten it and luckily for us there is a nice cover plate that we can place right on top we also have a corner plate that fits perfectly on the ends and you can also fasten each railing to the cap…

Auto-generated transcript. May contain errors.