Skip to main content

Test and Apply Caulk — Apply the Caulk

Beginner3 hours

Part of project

How to Caulk Gaps Along Stair Skirt Boards · Step 4 of 7

Helpful?

In this video

With the caulk gun loaded, gently squeeze the trigger until the caulk begins to dispense smoothly from the tip. Before applying to your actual project, test your caulk bead on a piece of scrap paper or a rag to ensure it's the right size and consistency. To apply the caulk, position the gun at an angle against the joint you wish to seal. Drag the gun backward along the joint while maintaining steady pressure on the trigger. Work in small, manageable sections to keep your caulk bead as even and regular as possible.

958.9K views4.5K
Transcript
Hide

load the canister in the gun and press the rod into the back of the canister until you feel it engage squeeze the trigger until the caulk is ready to dispense test your caulk bead on a piece of paper or a rag to make sure it is the right size apply the caulk by dragging the gun backwards across the joint and pulling the trigger work in small sections and try to keep your bead even and regular finish your bead with a finishing tool to push it into the corners and create a smooth surface you

Auto-generated transcript. May contain errors.