Skip to main content

Assess and Measure Required Cut Length — Measure Ladder Leg Length

Beginner2 hours

Part of project

How to Trim Attic Ladder Legs to the Right Length · Step 1 of 4

Helpful?

In this video

Begin by observing the attic ladder extended from its opening. If it's too long, it will not sit properly on the floor or fold away correctly. Fully extend the ladder to its intended position, ensuring it rests at the correct angle against the ceiling opening. Using a tape measure, carefully measure the distance from the bottom of the ladder's rail, at the point where it would contact the floor, up to the desired cut-off point. The video indicates a measurement of approximately 36.5 inches from the floor for the section to be removed.

37.7K views658
Transcript
Hide

As you can see, the ladder is too long and needs trim down. So I'm going to trim this down. I'm going to flip the ladder back on itself and then we're going to fully extend it down and we're going to get that measurement from the bottom of this ladder to the floor at this slope in order to give us our measurement to cut this section down to. If I extend my tape down at the same slope right to the floor, if I cut this to about 36 and a half inches looks about right. So I need to cut this section 36 and a half inches from this point down.

Auto-generated transcript. May contain errors.