Skip to main content

Attach Hanging Wire to D-Rings — Attach Hanging Hardware to Picture Frame

Beginner3 hours

Part of project

How to Hang Heavy Pictures on Drywall in a Stairwell · Step 6 of 8

Helpful?

In this video

Cut a length of picture hanging wire, about 6 feet for larger frames, ensuring it's appropriate for the weight of your frame. Take one end of the wire and thread it through the D-ring from the underside. Bring the wire over the top of the D-ring and then thread it back through the underside, creating a loop. Begin twisting the loose end of the wire around the main wire strand several times (at least 3-4 twists) to create a strong, secure connection that won't unravel. Use wire snips or pliers to trim any excess sharp wire ends close to the twists to prevent accidental cuts or damage. Repeat this process for the second D-ring. Before securing the second end, pull the wire across the back of the frame, ensuring it has adequate slack. The goal is to allow the wire to form an 'apex' when lifted, creating a single point for hanging. This slack prevents the frame from hanging too high on the wall and facilitates easier leveling. Crimp the wire at the desired slack point, then thread it through the second D-ring and twist it securely, trimming any excess as before. Test the wire by gently pulling up the middle to confirm the desired amount of slack and secure attachment.

6.9K views115