
How to Remove Carpet Staples and Tack Strips from Stairs
About This Project
This project involves safely removing carpet staples and tack strips from stairs to prepare the surface for a new flooring material or for refinishing. It requires careful attention to detail to avoid damaging the underlying stairs.
Tools & Materials

Milwaukee 4 in. x 1/4 in. Slotted Flat Head Screwdriver with Cushion Grip MT206

Pliers

Safety Glasses

Stanley 12 in. Wonder Bar Pry Bar 55-515K

Hammer

Putty knife

Milwaukee 4 in. x 1/4 in. Slotted Flat Head Screwdriver with Cushion Grip MT206
The Milwaukee® 1/4" Slotted 4" Cushion Grip Screwdrivers (USA) are manufactured to give the professional the best-fitting screwdriver with max grip. These screwdriver tips are custom machined to deliver

Pliers
Grips and manipulates objects.

Safety Glasses
Keeps eyes safe from potential hazards.

Stanley 12 in. Wonder Bar Pry Bar 55-515K
Get the prying power you need with the 12-3/4" Wonder Bar Pry Bar. The strong high-carbon steel hand tool is designed to give you excellent leverage for pulling nails, lifting, and scraping.

Hammer
Delivers forceful blows with precision.

Putty knife
Spreads putty with its flat blade.
Steps
Remove Carpet Staples
60 minutesBegin by locating all carpet staples. Insert the tip of a flathead screwdriver under the head of a staple and gently pry upwards. For stubborn staples, use needle-nose pliers to grip the staple and pull it straight out. Work methodically across each tread and riser, removing all staples.
Watch: Remove Staples and Protruding NailsRemove Tack Strips
45 minutesTack strips are typically nailed into the edge of the treads. Position a pry bar under the edge of a tack strip, close to a nail. Apply gentle leverage to lift the strip. Continue this process along the entire length of the strip, moving the pry bar as needed to loosen it. Once loose, pull the strip away from the wood. Remove all tack strips on each stair.
Watch: Remove Tack StripsRemove Old Adhesive and Debris
60 minutesAfter removing staples and tack strips, inspect the stairs for any leftover adhesive or carpet backing. Use a stiff putty knife or a specialized floor scraper to chip away and scrape off these residues. Hold the scraper at a low angle to avoid digging into the wood. Work across the entire surface of each tread and riser.
Watch: Scrape off Adhesive ResidueClean the Stair Surface
15 minutesUse a vacuum cleaner with a brush attachment to clean the entire surface of the stairs. Pay close attention to corners and edges where dust and small particles can accumulate. This step ensures a clean surface for any subsequent treatments or flooring installation.
Watch: Vacuuming Staircase Debris





