
Pipe Shelf Installation
About This Project
Are you ready for an easy DIY stair remodel? Getting the right measurements is the first step toward making your stairs safer and more stylish. Many homes have stairs with slight variations, so measuring each one ensures your new Oak Valley Designs treads will have a perfect, custom-made fit. This guide will walk you through the simple process, giving you the confidence to get it right.
Steps
Step 1: Measure Your Tread Depth
10 minutesFor each individual stair, place your tape measure firmly against the vertical panel (that's the 'riser') at the back of the step. Extend the tape straight out over the rounded front edge (the 'nosing'). For the most accurate reading, make sure you are measuring the bare wood, not any old carpet or adhesive residue. Write down this depth measurement for each step you measure.
Watch: Measure Stair Tread DepthStep 2: Measure Your Tread Width
10 minutesWorking one step at a time, measure the width of the tread from left to right. If your stairs are between two walls, measure wall-to-wall. For most residential stairs, leaving about a 1-inch space on either side of the tread creates a beautiful, clean border. This is the secret to getting that high-end, custom look! Record the width for each step.
Watch: Measure Stair Tread WidthStep 3: Record and Double-Check Everything
10 minutesIn your notebook, write down the width and depth you recorded for every single step. It's common for stairs in a home to have slight differences, so be sure to label any steps that have unique dimensions. If you're ordering custom-fit treads, snapping a quick photo of each step is incredibly helpful. Remember the old saying: measure twice, order once! This ensures we can get your treads just right.
Watch: Check Your Drawing
